Here is the link on the A30 site to the information on the bearing that we all seem to have.
The Cutless Bearing is 1 3/8″ O.D. X 7/8″ I.D. The Buck Algonquin name is Barracuda.
The bearing on Laughing Gull was replaced in 2006 or 2007 – not the casing shown in picture on link just the bearing.
Filed under Engine, Hardware, Mechanical, Propulsion
There was some discussion about how to rig the autohelm autopilot. This is how it is done on an old style boat (#197).
Filed under Deck, Helpful Things, Products
 | ricbergstrom on Chainplate Covers |
 | carintow on 2019 Winter Engine Work |
 | Constance on Rudder Work #2 – We have… |
 | Andrew Johns on Ice Box Rebuild |
 | analyticaltern on Ice Box Rebuild |
Sailing Tranquility 